Marine Navigation & Instruments
![Maretron Fuel Flow Sensor - 2-100 LPH [M1AR]](http://niluunlimited.com/cdn/shop/products/56231XL_600x@2x.progressive.jpg?v=1637666330)
SKU: CWR-56231
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: NMEA Cables & Sensors
VENDOR: Maretron
Fuel Flow Sensor - 2-100 LPHFeatures: Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH) All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4" NPT female threads Nominal K Factor: 1000 pulses/L (3785.4...
![Octopus Sterndrive System f/Mercruiser from 1994 & North American Volvo from 1997 w/9' Cable [OCTAFMDRESYSA-9]](http://niluunlimited.com/cdn/shop/products/56541XL_600x@2x.progressive.jpg?v=1637666995)
SKU: CWR-56541
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: Autopilots
VENDOR: Octopus Autopilot Drives
Sterndrive System f/Mercruiser from 1994 & North American Volvofrom 1997 w/9' CableThe heart of this pilot drive system is the remote drive. The drive unit is connected to the boat steering by a cable and connection kit.The remote drive system...
![Garmin Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 0 Degree Tilt, 8-Pin - Airmar B175HW [010-12181-20]](http://niluunlimited.com/cdn/shop/products/56934XL_600x@2x.progressive.jpg?v=1637667520)
SKU: CWR-56934
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: Transducers
VENDOR: Garmin
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 0° Tilt, 8-Pin - Airmar B175HWStep up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the...
![Garmin Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20 Degree tilt, 8-pin - Airmar B175HW [010-12181-22]](http://niluunlimited.com/cdn/shop/products/56936XL_600x@2x.progressive.jpg?v=1637667534)
SKU: CWR-56936
AVAILABILITY: In stock (5 items)
PRODUCT TYPE: Transducers
VENDOR: Garmin
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20° Tilt, 8-Pin - Airmar B175HWStep up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the...
![Airmar 117WR-4 Transducer Housing Wrench [117WR-4]](http://niluunlimited.com/cdn/shop/products/57084XL_600x@2x.progressive.jpg?v=1637668089)
SKU: CWR-57084
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench...
![Airmar 60WR-4 Transducer Housing Wrench [60WR-4]](http://niluunlimited.com/cdn/shop/products/57085XL_600x@2x.progressive.jpg?v=1637668095)
SKU: CWR-57085
AVAILABILITY: In stock (4 items)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60...
![Airmar 175WR-4 Transducer Housing Wrench [175WR-4]](http://niluunlimited.com/cdn/shop/products/57087XL_600x@2x.progressive.jpg?v=1637668108)
SKU: CWR-57087
AVAILABILITY: In stock (5 items)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with:...
![Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]](http://niluunlimited.com/cdn/shop/products/57145XL_600x@2x.progressive.jpg?v=1637668181)
SKU: CWR-57145
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily...
![Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]](http://niluunlimited.com/cdn/shop/products/57148XL_600x@2x.progressive.jpg?v=1637668200)
SKU: CWR-57148
AVAILABILITY: In stock (2 items)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily...
![Airmar 117WR-3 Double Handle Transducer Wrench [117WR-3]](http://niluunlimited.com/cdn/shop/products/57149XL_600x@2x.progressive.jpg?v=1637668208)
SKU: CWR-57149
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily...
![Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]](http://niluunlimited.com/cdn/shop/products/57150XL_600x@2x.progressive.jpg?v=1637668214)
SKU: CWR-57150
AVAILABILITY: In stock (2 items)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily...
![Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]](http://niluunlimited.com/cdn/shop/products/57152XL_600x@2x.progressive.jpg?v=1637668227)
SKU: CWR-57152
AVAILABILITY: In stock (3 items)
PRODUCT TYPE: Transducer Accessories
VENDOR: Airmar
164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily...
